Ebike Anti-Theft Alarm

Security for your Electric Bicycle

Keep your ebike safe and secure on the road!

Available on all Veloteq Ebikes

1. Features
2. Operation
3. Specifications

Features

The Veloteq Anti-Theft Alarm System is designed to help prevent tampering or theft of your ebike. It is fully integrated factory-installed system that will not only warn you if someone tampers with your vehicle, it will shut down the entire electrical system preventing all operation until it is released. Programmable functions permit you to adjust the alarm system to fit your surroundings.

Simply carry it with you with your key attached and control the system from anywhere within 230 feet (70 meters). Operation is simple using the digital display on the remote control.

Depressing the activation key causes the loudspeaker to emit a "prompt" signal letting you know that the system is armed.

While in the armed state, if vibration is detected the alarm will trigger immediately, the loudspeaker will sound intermittently for 5 seconds, and the motor is disabled; the alarm will again sound after 15 seconds if vibration continues the loudspeaker will again emit a long signal for 15 seconds, the motor is disabled.

In the security alert state, attempting to use force to start the vehicle will cause the
loudspeaker to emit a continual loud alert, simultaneously disabling the electrical system.

Anti-theft/Anti Bike-jacking-While in the alarmed state depressing the alarm key will cause the loudspeaker to emit a loud continuous sound for 30 seconds and cause the motor and ignition to lock.

Remote Kill Switch-While the vehicle is in motion depressing the alarm key immediately kills power to the motor.

Suspending or releasing the alarm is simple using the remote. To release temporarily while the alarm is sounding, depressing and holding the alarm key will temporarily halt the alarm signal while maintaining the system in the armed state. To release the vehicle from the alarmed state, depress the alarm key, the loudspeaker will sound twice releasing the vehicle from the alarmed position.

The shock and vibration sensitivity is programmable using the remote. While in the alarm system release state, depressing the loudspeaker key for 5 seconds will enter the sensitivity adjustment mode. Select 0 for high sensitivity, center (two) for low
sensitivity or (three) to circulate. After confirmation the selection is activated.

Can't find where you put your ebike? In either the armed or unarmed state continuously depressing the alarm key will cause the loudspeaker to emit a continuous sound until the key is released.

Remote Start-Have your ebike ready to go before you get on. In either the armed or unarmed state depressing the two keys located below the electrical system lock “off” position will start the vehicle immediately.

Back to Top

Operation

1. Acoustical/Optical Security
Depressing the activation key causes the loudspeaker to emit a “prompt” signal.
After 3 seconds the alarm apparatus automatically enters the armed state.
2. Motion Alarm
While in the alarm position, when vibration is detected the alarm will trigger for the first time, the loudspeaker sounds intermittently for 5 seconds, and the motor is unable to start; the alarm will again sound after 15 seconds if vibration is detected and loudspeaker will again emit a long signal for 15 seconds, the motor is disabled.
3. Emergency Alarm
In the security alert state, attempting to use force to start the vehicle will cause the
loudspeaker to emit a continual loud alert, simultaneously disabling the electrical system.
4. Suspending the Alarm
While the alarm is sounding, depressing the alarm key will temporarily halt the alarm signal while maintaining the system in the armed state.
5. Releasing the Alarm
While in the alarmed state, depress the alarm key, the loudspeaker will sound twice
releasing the vehicle from the alarmed position.
6. Anti-theft/Anti Bike-jacking
While in the alarmed state depressing the alarm key will cause the loudspeaker to emit a loud continuous sound for 30 seconds and cause the motor and ignition to lock.
7. Remote Kill Switch
While the vehicle is in motion depressing the alarm key immediately kills power to the
motor.
8 . Vehicle Locater
In either the armed or unarmed state continuously depressing the alarm key will cause the loudspeaker to emit a continuous sound until the key is released.
9. Remote Starting
In either the armed or unarmed state depressing the two keys located below the electrical system lock “off” position will start the vehicle immediately.

Back to Top

Specifications

1. System working voltage: 36V-48V
2. System Idle Current: <7MA
Discharge Current: <60MA
Controller: Emission Current: <4MA
3. Transmission Frequency: 315MHZ +-75KHZ
4. Remote control service range: 230 feet/70 meters (open area)
5. Alarm Sound Pressure Level: >100dB

Back to Top